"CLICK"
"CLICK"
2
1
"CLICK"
"CLICK"
Figure 1. Connect the Power Cord
To Disconnect:
*ULSWKHSRZHUFRUG¿UPO\RQHDFKVLGHDQG
press two tabs to release (see Figure 2.)
Figure 2. Disconnect the Power Cord
2.4 Connecting the Floating Cable to
the Control Box
WARNING
Failure to comply with the following warnings can
result in permanent injury, electrocution or drowning.
PREVENT ELECTRICAL SHOCK
•
Keep the Control box at least 3.5 m from the edge
of the pool.
•
The cleaner is to be installed in accordance with
the relevant requirements of the Australian wiring
rules AS/NZS 3000. Also refer to the installation
instructions relating to the swimming pool equipment
for which the cleaner will be an integral part. The
cleaner is to be supplied through a Residual Current
Device (RCD) with a rated residual operating current
of 30mA.
•
Do not use an extension cord to connect the
Control box.
•
Do not allow anyone to swim while the cleaner is in
the pool.
•
The Control box is water-resistant, not waterproof.
In order to prevent electrocution, never submerge
the Control box or leave exposed to inclement
weather.
To Connect:
•
Rotate the power cord so that TOP is shown on
WKHWRSVLGH3UHVVWKHSRZHUFRUG¿UPO\LQWR
the control unit until you hear a "click" (see
)LJXUH7KHFOLFNLQJLQGLFDWHVWKHSRZHUFRUG
is connected correctly creating a watertight seal.
5
H0446500_REV A
