Thank you for purchasing your Freestyle Slides Freestyle Pool. Your pool should give you
years of fun in the water! After reading this manual, please contact us directly if you have any
additional questions regarding your product.
BASIC INFORMATION
Inside your package you will find (1) Freestyle Pool with netting, (2) inflation pumps, repair kit,
sea weights relative to the size of the pool, (2) ladders and these setup instructions.
Every Freestyle Pool has multiple inflation valves on the main body. Some units also have a
pressure relief valve (PRV) as well. In cases where your unit does
NOT
have a PRV, please
make sure that you do not over-inflate the unit. Your electric pump will have fittings that will
connect to your inflation valves of your pool for proper inflation.
The pool is assembled in two parts, the main body and the netting that will be anchored below
the waterline. The main body is made of Drop Stitch material and can be inflated up to 1 O psi.
To ensure a rigid walking surface the main body needs to be inflated to at least 5psi. This added
pressure will ensure the deck area will not buckle under the weight of the user.
NOTE:
If the
white Drop Stitch is under-inflated, the deck area will be soft and the user will have difficulty
walking on the deck, causing a less desirable experience.
Once the pool is fully inflated make sure that it is tied securely to your vessel or docking area
before you proceed to anchor the netting of the pool.
The Freestyle Pool is designed to be used in calm waters where there is very little current. The
Sea Weights will not keep the netting in place with a rapid water flow situation. Please keep this
in mind when you are selecting a site to launch the pool.
OWNER’S MANUAL
1
1
FreeStyle Slides, Inc.
2399 26th Ave North
St. Petersburg, Florida 33713
Phone: 727-563-2003
Fax: 727-570-9044
www.freestyleslides.com
Summary of Contents for Freestyle Pool
Page 3: ......
