Weather Station - Model “PRO”
Nov., 2001 Page
36
Model “PRO”- Weather Station
Cozz GT27145B
FIGURE 19 - TELEPHONE MODEM INSTALLATION IN ET ENCLOSURE
9.0
SEALING & DESICCATING
THE ENCLOSURE:
The Enclosure is supplied with a
desiccant pack. The desiccant maintains
a low humidity in the enclosure to
minimize the chance of condensation on
the instrumentation Desiccant should
be changed when the internal Enclosure
humidity sensor measures 30% or
higher. Install the desiccant as shown in
FIGURE 21 below.
Keep unused desiccant tightly sealed
inan airtight container.
Take the desiccant pack out of its sealed
plastic bag. Place it under the dessicant
strap just before leaving the station.
Be sure to close the enclosure hasp
securely. A padlock may be used on the
latch for extra security.
FIGURE 20 - DESSICANT PACK
INSTALLATION
