ESP-LX Modular Controller
53
The display shows the currently selected program and “Manual
Watering/Start Program.” If the program you want is not
displayed, use the program select switch to change it. See page
17 for instructions.
Press “Run” to manually start the program. “Watering”
appears in the display.
While the Program Is Running
While the program is running manually and the dial is set to
“AUTO,” the display shows the program and valve currently
watering and the time left to water.
You can press“+” or “–” to add or subtract run time from the
valve that is currently running.
To advance to the next valve in the program sequence, press
“Adv Valve.” Go to step 1.
To cancel the manual operation of the program, turn the dial to
“OFF” for three seconds. Then turn the dial back to “AUTO.”