ESP-LX Modular Controller
49
While a program is running and the dial is set to “AUTO,” the
display shows the program and valve currently watering and
the time left to water.
You can press“+” or “–” to add or subtract run time from the
valve that is currently running.
To advance to the next valve in the program sequence, press
“Adv Valve.” Go to step 2.
To cancel a program that is currently running, turn the dial to
“OFF” for three seconds. Then turn the dial back to “AUTO.”
To turn the controller off and prevent all watering, turn the dial
to “OFF.” Any valve that is currently operating will stop
running. The display shows “All Watering Off,” along with the
current time.
You can use the “OFF” setting to suspend watering during
seasonal shutdown or system maintenance.