24
ESP-LX Modular Controller
Set Valve Run Times
You can set any valve to run from 0 to 12 hours. For the first two
hours, you can set the watering time in one-minute increments. For
the remaining 10 hours, you can set the watering time in 10-minute
increments.
Turn the dial to “SET VALVE RUN TIMES.”
The display shows the currently selected program and Valve 1,
along with its current run time. The run time numbers flash. If
the program you want is not displayed, use the program select
switch to change it. See page 17 for instructions.
To set the run time for a different valve, press “+” or “–” under
“Valve” until the valve number you want appears in the
display.
To set the valve run time, press “+” or “–” under “Hrs Min.”
The run time will change in one-minute increments until the
time reaches two hours. Then the run time will change in 10-
minute increments.
To set run times for additional valves, repeat steps 3 through 5.
NOTE:
If you have finished setting all programs,
you should confirm your program settings. See
“Confirm Programs” on page 54.