38
ESP-LX Modular Controller
The display shows Valve 1 and its current setting for Master
Valve/Pump, either On or Off. (The default setting is “On.”)
The setting flashes.
To select a different valve, press “+” or “–” until the valve
number you want appears.
Depending on how this valve is currently set, either “On” or
“Off” flashes. To use the master valve or pump relay with this
valve, press “On.” To remove the master valve/pump relay
assignment, press “Off.” The MV/Pump setting affects the
valve in all programs to which it is assigned.
To select another valve, press “+” or “–” until the valve
number you want appears. Then repeat steps 6 and 7.
Sensor Override
The ESP-LX Modular controller lets you set valves to run even
when a sensor is active.
Turn the dial to “VALVE SETTINGS.”