23) Run "Device Manager" in Windows and confirm MPIO functions. Then use IOMETER to do
performance test.
4.12 For configuring MC/S and MPIO (they’re similar) refer to configuring
MPIO
1) Use 3 hard disks to establish VG and RAID 5.
2) Use RAID 5 VG to establish UDV.
3) Run Microsoft iSCSI initiator 2.0 and confirm Initiator Node Name.
4) At R5 UDV attached with LUN enter Initiator Node Name at Host field.
5) The process for setting volume is complete.
6) Confirm iSCSI device. Confirm iSCSI's IP Addresses such as port 0 is 192.168.11.229, and port 1 is
192.168.12.229
7) Add Target Portals at Microsoft iSCSI initiator 2.0
8) Enter IP Address (192.168.11.229) at iSCSI data port 0
For MC/S, there is only ONE “Target Portal” in the “Discovery” tab.
58
Introduction to User Interface
