4.3 Speedy installation
You can use the “Quick install” function to perform quick configurations. With RAID levels 0, 1, 3, 5, 6,
the system will automatically calculate the maximum available space and it depends on the number of
your hard disks or the space left.
1) After selecting “Quick install”, the system will ask you to configure your RAID level. After configuring
the RAID level, click and select “
” to go to the next page and perform “LUN”
configuration process.
2) Please select an amount for the Logic Unit (LUN). You can change the capacity of the amount. The
page will display the maximum storage space. Please enter a value smaller or equal to the maximum
storage capacity. After confirming, please click and select “
”
3) Confirmation page. The system will display all related information. If the information is correct, click
and select“
”
After completing the process you can use this system.
4) For the details of the process see introduction below
4.4 System structure
The “System config” option allows you to change settings for basic system management functions.
26
Introduction to User Interface
