4.7.1 SES structure
SES refers to SCSI Enclosure Services. Go to “SES config” function to activate or close SES
management.
The application software for SES user can be downloaded at the site below:
SANtools:
http://www.santools.com/
4.7.2 Hardware information
Go to “Hardware Monitor” function to check the current voltage and temperature.
If you check “Auto shutdown” function, the system will close when the voltage and temperature goes
above the normal range. For optimum protection of data, please check “Auto Shutdown” function.
4.7.3 Support hard disk S.M.A.R.T. function
S.M.A.R.T. (Self-Monitoring Analysis and Reporting Technology) is a hard disk diagnostic tool and
provides warnings before hard disk errors. It provides an opportunity for prevention before the hard disk
is damaged.
S.M.A.R.T. tests the many attributes of the hard disk at any time and evaluate if the capacity limit is
being reached. Advanced notifications of damaged hard disk allow you to backup the disk or replace
it with new hard disk, which is much superior to damaging data while accessing or reconstruct a
damaged hard disk.
Go to “S.M.A.R.T.” function and it will display the S.M.A.R.T. information for the hard disk. The number
represents the current value and the value inside the parentheses represents the default value.
The default value for each brand is different from one another. For detailed information refer to the
specification explanation of the brand.
Introduction to User Interface
41