a. Select “/ Volume config / Physical disk”
b. Select box to check available space and then click and select “
” and set it as
shared space.
c. In status 1 field the system will display “GS” icon.
5) The process is completed and the disk can be used as an iSCSI.
To delete UDVs, VG, refer to the steps below:
6) Separate LUN from UDV
Go to “/ Volume config / Logical unit”
a. Click and select the selection box and place check next to the desired LUNs and then click and
select “
” and a confirmation window will pop up.
b. Click and select “OK”
c. The process is completed.
7) Delete UDV (User Data Volume).
To delete UDV, follow steps below:
a. Select “/ Volume config / User data volume”
b. Click and select the selection box and place check next to the desired UDVs.
c. Click and select “
” and a confirmation page will pop up.
d. Select “OK”
e. The process is completed and the UDVs have been deleted.
Hint: After deleting UDV, the attached LUN(s) will be automatically separated.
8) Delete VG (Volume Group)
To delete VG, refer to the steps below:
a. Select “/ Volume config / Volume group”
b. Select the selection box and place a check next to the desired VG. Confirm the VG selected does not
have UDV, or the UDV(s).
c. Click and select “
” and a confirmation Window will appear.
d. Click and select “OK”
e. The process is completed and the VG has been deleted.
Hint: The action for removing VG can only be performed when UDV(s) above have been deleted, or
an error will occur when the VG is deleted.
9) Free shared volume hard disk
To free shared volume hard disk, please refer to the steps below:
a. Select “/ Volume config / Physical disk”
b. Click selection box to place a check next to the shared volume hard display and then click and select
“
” to free hard disk.
10) The process is completed and all the volumes have been deleted.
38
Introduction to User Interface
