Raider RDI-EBV06, User Manual

Page: 40 / 80

40 www.raider.bg
manju vjerojatnost da se vežu i lakše su kontrolirani.
• Koristite električni alat, pribor i alatne trake itd. U skladu s ovim uputama, uzimajući u obzir radne
uvjete i rad koji treba izvesti. Korištenje električnog alata za operacije različito od onih namijenjenih može
rezultirati opasnom situacijom.
Service
Have your power tool serviced by a qualified repair person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
/See the guaranteed conditions./
Machine- specific safety warnings
• Do not vacuum and blow materials that are hazardous to one`s health e.g. dust from beech or
wood, masonry dust, asbestos. These materials are considered carcinogenic.
• Do not vacuum and blow liquids. The pernetration of liquid increases the risk of an electric
shock.
• Keep the power tool away from rain or moisture. The penetration of water into the motor
increase the risk of an electric shock.
• When operating the power tool in damp environments is unavoidable, use a residual current
device. The use of a residual current device reduces the risk of an electric shock.
• Never use the machine with a damaged cable. Do not touch the damaged cable and pull the
mains plug when the cable is damaged while working. Damaged cables increase the risk of an electric
shock.
• Do not drive over, crush or stretch the cable. Do not pull the cable to unplug the plug from the
socket outlet or to move the power tool. Damaged cable increases the risk of an electric shock.
• During work breaks, when not in use or when working on the power tool/e.g. changing tool
inserts, repairs, cleaning, adjustments/, pull the mains plug. This safety measure prevents accidental
starting of the power tool.
• Provide good ventilation at the working place.
• Do not allow children to use the power tool without supervision. Children can injure themselves.
Wear additional personal protective equipment, such as safety googles and respirator. Wearing
protective equipment for appropriate conditions reduces the exposure toward hazardous substances.
Intended Use
The machine is intended for vacuuming and blowing of materials that are not hazardous to one’s
health.
The machine is not suitable for vacuuming and blowing of flammable materials, metal chips and sharp
objects, such as screws or nails.
Starting operation
Observe the main voltage! The voltage of the power source must correspond with the data on the type
of the machine.
The blower can also be used as a vacuum; simply move the nozzle to the vacuum port and connect
the dust bag.
Switching On and Off
To start the machine, press the On/Off switch.
To lock the On/Off switch, keep it pressed and additionally push the lock-on button.
To switch off the machine, release the On/Off switch is locked, press it first and then release it.
Regulating the air flow
Adjust the required air volume by turning the thumbwheel.
Turning in clockwise direction: Increases the air volume.
Turning in anticlockwise direction: Reduces the air volume.
Operating modes
Blowing
For operation mode “blowing”, firmly attach the nozzle in alignment with the arrow mark onto the air