13
4-2 Raider 50 Fuel Mix ratio (50:1)
Add engine oil into fuel oil tank. The mixing ratio with gasoline is 50:1 (one part oil and
50
parts
gasoline)
.
Mix well by hand. The mixing ratio during break-in running is I: 25.
Mixing Ratio
Engine Oil
Gasoline
During break-in
1
25
After break-in
1
50
4-3 Heavy Fuel Ratio (JP-5/8; kerosene; diesel) (50:1 Raider Oil + Additive)
The required amount of engine oil is same as gasoline. ALSO required is
Raider Additive to reduce smoke/carbon buildup. One container treats
A 6-gallon bladder.
5. RUNNING THE RAIDER
5-1.
Break in (minimum)
- - - - -
-10 hours
The most critical time in the life of your engine is the first IO hours of operation
.
Correct operation
during this break
-
in period will prolong the life of the engine and ensure optimum performance. Follow
the procedures shown below carefully.
Time
Break-in method
Running Conditions
O min
-
Trolling or idling speed
Cruising at minimum speed
10 min -
T Throttle opening
(
1/2
about 3
,
000 rpm
-
1 hr -
T Throttle opening
(
3/4
about 4
,
000 rpm
Run with full throttle for 1
m
i
n-10 min.
2 hrs -
Throttle opening 3/4 about
4,000 rpm
Run with full throttle for short
time
10 hours
Normal running
-
A
CAUTION
Severe engine damage may be caused if the break in procedures
described above is not observed.
Change new gear oil after 10 hours break
-
in.
A
CAUTION
During break-in of the engine, additional engine oil must
be
added
to the fuel gasoline to maintain a 25:1 ratio.
