
Raider Operators Manual R40ES-001-15-1
2
e. Specification Table
ITEM
RAIDER 40 HP
Overall length
38.18 inches (919 mm)
Overall width
13 inches (330.2 mm)
Overall height
49 inches (1245 mm) (Long Shaft)
Weight
148 lbs. (67kg)
Transom length
20.9 in. (530 mm)
Engine type
2-Stroke Throttle Body
Piston Displacement
493 cc
Bore and Stroke
2.76 x 2.52 (70 mm x 64 mm)
Number of cylinders
2
W.O.T.
5200
–
5800 rpm
Exhaust System
Through Hub
Cooling System
Water cooling (Rotary rubber impeller)
Ignition System
C.D. ignition
Starting System
Pull Start; rope backup (electric start with
battery under cowl)
Intake System
Reed Valve
Scavenging system
5-port loop Charge
Exhaust silence system
Add on feature
–
Lubrication system
Fuels pre-mixed with additives
Cooling system
Water-cooling
Water temperature control
Thermostat (with pressure relief valve)
Ignition System
Inductive
Gear Reduction
Gear Ratio
13 : 25
1.85
Firing Order
1-2
Spark Plug
NBE1H/10 (stainless steel)
Alternator
12V 280W (Maximum) (13.6 volts regulated)
Battery
Lithium Iron
–
fully sealed 12 VDC
Trim Angle
4-24 degrees
Trim Angle settings
6 degrees
Maximum tilt-up angle
75 degrees
Transom board thickness
31-70 mm (1.22
–
2.76 in.)
Maximum steering angle
80 degrees
Gear shift
Dog clutch (F-N-R)
–
front location
Electric Start
Push button with safety ring
Throttle Control
Tiller Handle
Fuel Bladder/Tank
Furnished by customer
–
Mercury connector
JA-8 & heavy Fuels
Additive required-Add to Heavy Fuel Bladder
Gasoline
50 : 1 mix. Add prior to mission in bladder
Engine Oil
Raider provided (synthetic)
Gear Oil
API GL5, SAE#80 to #90 500 ml (16.89 fl.
Oz.) (Synthetic recommended)
Submersibility parameters
66 ft/18 hours; 50 ft./24 hours
Grab Handle
RAMZ and T-Duck Compatible
Dewatering Lever
Push back to open cylinder outlets; hold
back to dewater fuel system
Primer pump
Located in front of Raider