MicroRAE User’s Guide
33
While it is searching for a network to join, the display shows this message:
If it is unsuccessful, the display shows this message:
Check your other settings, as well as those of the network you are trying to join.
You can press [Y/+] to retry or [MODE] to exit without joining a network.
9.3.5.9. Factory Reset
Restore all the wireless settings to their original factory defaults.
Caution!
Once you reset the wireless settings, you cannot retrieve any of the settings deleted by
performing this reset.
Press [Y/+] to initiate a factory reset. You see this screen:
Reset Radio?
•
Press [Y/+] to reset the wireless settings. You see the message “Pls Wait” while it resets
to factory settings. When it is done it shows the PAN ID and Channel.
•
Press [MODE] to exit.
9.3.5.10. Exit
Exit to the main reading screen: Press [Y/+].
Return to the top of the “Set Radio” menu: Press [MODE].
