MicroRAE User’s Guide
15
3.4. Glance Mode
If you want to check your instrument’s configuration and it is turned off, you do not have
to turn it on. Press and hold [Y/+] until the screen illuminates and shows the
configuration. This tells you the installed sensors:
Press [Y/+] to advance through screens that tell you if the radio is on, BLE is on, GPS is
on, WiFi is on, etc. These change, depending on the instrument’s configuration.
To exit, press [MODE], and the display shuts off.
Note:
If you do not press a button for 60 seconds, it turns off automatically.
3.5. Panic Alarm
Press and hold [Y/+] at any time to trigger the Panic Alarm. The display shows “PANIC
ALARM” and sends a message to the Location Manager or ProRAE Guardian.
(
Note:
Use ProRAE Studio II to define information and its prioritization for viewing.)
In addition, the instrument alarms (audible and visible) four times per second. The
instrument also sends an emergency message to the Location Manager or ProRAE
Guardian.
Press [Y/+] to clear the alarm. The alarm stops and the display returns to the main
reading screen.
3.6. Confidence LED
You can use ProRAE Studio II to program the MicroRAE to continually provide an LED
blink every 3 seconds so that you can tell without looking closely that the instrument is
working.
