PROGRAMMING OF IAQRAE
4-24
4.5.2 Change User ID
The user may enter an eight-character user ID, which will be
included in the datalog report.
1. At the “Change User ID?” screen, press [Y/+] and the
display will have the current user ID: “User ID = xxxxxxxx”.
Press [MODE] to move the cursor to the left-most digit.
2. Press [Y/+] or [N/-] to cycle through all 26 letters and 10
numerals. Hold down [Y/+] or [N/-] for rapid scrolling. Press
[MODE] to advance to the next digit on the right. Repeat
until all 8 digits have been entered.
3. Press [MODE] to move the cursor to “Save?” Press [Y/+] to
accept the new site ID and exit the submenu. Press [N/-] to
discard changes and advance to the next submenu.
