manualshive.com logo in svg

Rae IAQRAE PGM-5210, Operation & Maintenance Manual

Share
Download
Rae IAQRAE PGM-5210 Operation & Maintenance Manual Download Page 58

PROGRAMMING OF IAQRAE 

 

4-20 

4.4.4 Enable/Disable Datalog

 

The user may enable or disable the datalogging function for 
each sensor. This allows the user to selectively log certain 
sensor readings of interest. 

1.  When the “Enable/Disable Datalog?” appears, press [Y/+]. 

The display will show all enabled sensors installed in the 
monitor. All previously selected sensors enabled for 
Datalog are marked with an asterisk (*). The cursor will be 
blinking on “OK?”  

 

CO* 

       VOC   

CO2* 

 

RH* 

        OK?  

Temp* 

2.  Press [MODE] to move from one sensor location to the 

next one. Press [Y/+] to enable datalogging for the sensor 
or [N/-] to disable datalogging. Repeat until all sensors that 
need to be enabled for datalogging are selected. 

3.  Use [MODE] to move the cursor to “OK?” To confirm the 

new selections, press [Y/+] to accept the change. Press 
[N/-] to discard changes and move to the next submenu.   

Summary of Contents for IAQRAE PGM-5210











































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands