PROGRAMMING OF IAQRAE
4-35
4.6.2 Edit Correction Factor
The user can modify the correction factor from the monitor.
1. When the “Edit Correction Factor?” screen appears, press
[Y/+] the display shows the current correction factor:
Correction Factor=
100
Save?
2. Press [MODE] to move the cursor from “Save?” to the left
digit. Press [Y/+] or [N/-] to cycle through 10 numerals.
Press [MODE] to advance to the next digit on the right.
Repeat until all digits of have been entered.
3. Press [MODE] to move the cursor to “Save?” Press [Y/+]
key accept the new correction factor and exit submenu. To
discard changes, press [N/-] and exit submenu.
