Press “c” to enter the configuration menu.
qp
Once Again
•
R or r for refresh
•
Q or q to quit this menu back to the previous – note this does not save any changes
•
S or s to save any changes to the EEPROM memory
Now the specific items –
The Key fields are shown as X_x, Y_y : the shifted version of the key is used for a big step, the lowercase for a single
step up or down. The Shifted step is normally 10x the single step.
•
!_1 or @_2
: Select / change the profile number that is being edited and used. The profile that was selected
when last saved is what becomes the default power up profile.
o
This allows for 4 completely different Gauge setups to be stored in the gauge in the case that you
might move them between bike models or wish to experiment.
o
This relates to the values on the Parameters screen as well as those on the configuration screen.
•
W_w or E_e :
Increment or decrement the Wheel Circumference.
o
Note – this is in
mm
as this gives more accuracy in an easier to adjust format.
o
Note that this represents the ground distance travelled for one complete pulse from the speed
sensor. This can widely vary from 1 pulse per revolution of the wheel – to many pulses per
revolution. See the appendix for known or example values.
•
T_t or Y_y :
Increment or decrement the tacho pulse to RPM divider. This sets the ratio of pulses to the
engine RPM. Usually this will be
1.0
for a wasted spark system. Values 0.5 to 3.0 are available
o
Wasted Spark – coil sense – 1.0
o
Non wasted spark – single coil sense- 0.5
o
Camshaft RPM sensor – 0.5 (as at ½ engine RPM)
•
O_o or P_p:
Set Odometer reading: Set the starting Odometer reading to the nearest 1000 km or miles.
o
Note this can only be set the first time – once the bike is operated the increased value is stored and
any changes made in the configuration will be ignored.
o
Note – there is a reset procedure to override the odometer and allow it to be reset if you change the
meter between bikes.
Summary of Contents for V1.02 OBD-Bridge
Page 1: ...V1 02 OBD_Bridge Installation Manual Rae San 19 12 2019 ...
Page 20: ...GROUND ...
Page 26: ......
