•
Adjustable tacho pulse per rpm.
•
Voltmeter calibration to allow for voltage drops.
•
Adjustments for tank and reserve capacity
•
Inputs can be reassigned if needed.
•
Sample Rate 10Hz for each input.
•
Selectable Filtering on Analog inputs –
o
RAW, Avg 1,3,6s, Peak hold HIGH or LOW – 3, 6 s decay.
o
Used for pulsed or PWM outputs.
•
Inputs are filtered and clamped – protection.
•
Field Upgradable firmware.
•
4 stored profiles of configuration settings – move back and forth between 4 bike types with one setting
change.
•
Profiles come preconfigured for popular bikes.
Possible Uses
•
Bluetooth connected logging
•
Log all the data to file for analysis later
•
With TPS and O2 sensor – fuel map can be measured for injection / carb adjustment
•
Log engine / performance data using the phone accelerometers.
•
Bluetooth connected Dash –
•
Use your phone / device as a customisable dash.
Summary of Contents for V1.02 OBD-Bridge
Page 1: ...V1 02 OBD_Bridge Installation Manual Rae San 19 12 2019 ...
Page 20: ...GROUND ...
Page 26: ......
