
MNC-0400-001
25 of 54
REV H
Operation, Rack and Digital HPAs
exceeds the allowed number, the oldest entry is dropped. The
GAIN
control knob is used to scroll through the list of faults.
Press [
Enter
] to return to the Alarms/Faults Menu.
Set Max Power Menu
The
Set Max Power Menu
, Figure 10 allows you to control the
maximum power detection circuits.
The front panel 10-key pad and three of the softkeys of the
Set
Max Power Menu
are active. The front panel 10-key pad is used
to enter the desired maximum power level.
Entries are in the units shown on the second line. Press [
Clear
]
to clear your entry. Press [
Enter
] to accept your entry.
The
Set Max Power Menu
softkey functions are:
[Softkey 1]—
Cycles one step each time the softkey is pressed.
The step sequence is:
OFF ALARM FAULT OFF etc.
The three choices are:
OFF
— Disables the alarm and fault detection functions.
ALARM
— Enables the maximum power-detection circuit
alarm. The display will show the Alarm and the buzzer
will sound but the amplifier will stay on.
FAULT
— Enables the maximum power fault detection
circuit. The display will show a Fault; the buzzer will
sound and the high voltage will shut off.
[Softkey 2]—
Not Used. Numeric value shown on the line to the
left of this softkey is the current power level setting.
[Softkey 3]—
Not Used (Value you enter from the keypad is
displayed to the left of this key.)
Entries are in the units shown on the second line.
[Softkey 4]—
Pressed to return to the
Alarms/Faults Menu
.
EAR EXPORT CONTROLLED: The information contained in this Manual refers or relates to a product that is subject
to the U.S. Export Administration Regulations (EAR). Transfer of data herein by any means to a Foreign Person,
whether in the U.S. or abroad, may require an export license from the U.S. Department of Commerce.