MNC-0400-001
50 of 54
REV H
Operation, Rack and Digital HPAs
WARNING
ELECTRIC SHOCK HAZARD due to high voltage
capacitors inside the equipment. Allow five minutes for
the capacitors to completely discharge before removing
lid and working in the equipment. Failure to comply
could result in serious injury or death to personnel.
WARNUNG
GEFAHR VON ELEKTRISCHEN SCHLÄGEN wegen
unter Hochspannung stehender Kondensatoren
innerhalb des Gerätes. Lassen Sie den Kondensatoren
fünf Minuten Zeit zur völligen Entladung, bevor Sie den
Deckel abnehmen und im Gerät hantieren.
Nichtbefolgen könnte die schwere Verletzung oder den
Tod von Menschen zur Folge haben.
Clearing Alarms and Faults
See “Menu and Screen Descriptions” on page 13 for information
about clearing the alarms and faults.
Initial Turn-On Procedure
This procedure applies the first time the unit is operated at your
site and after any major repairs of the amplifier.
Caution
Operators and Service Personnel must observe the
instructions in the following paragraphs. Failure to
comply may cause permanent damage to the amplifier
and void the warranty.
Vorsicht
Betreiber und Wartunspersonal müssen die
Instruktionen in den folgenden Paragrafen beachten.
Nichtbefolgen kann dauerhafte Schäden am Verstärker
verursachen und die Garantie unwirksam machen.
Prepower Check
1 Prime power voltage is within the specified limits of the amplifier.
2. The RF output is terminated with a load capable of dissipating rated
RF output power and the load has a maximum VSWR of 1.3:1.
EAR EXPORT CONTROLLED: The information contained in this Manual refers or relates to a product that is subject
to the U.S. Export Administration Regulations (EAR). Transfer of data herein by any means to a Foreign Person,
whether in the U.S. or abroad, may require an export license from the U.S. Department of Commerce.
