Radyne DMD20 LBST Installation And Operation Manual Download Page 130

Page: 130 / 306

DMD20/20LBST Universal Satellite Modem

User Interfaces

MN-DMD20-20LBST Revision 14

4–22

ESC CHAN#1 (dB)

{-20 to +10 dB}

Allows user to select ESC Voice Channel Gain. Only
displayed when IDR NETWORK and VOICE Channel are
selected.

ESC CHAN#2 (dB)

{-20 to +10 dB}

Allows user to select ESC Voice Channel Gain. Only
displayed when IDR NETWORK and VOICE Channel are
selected.

RX SETUP (menu)

CIRCUIT ID

Provides entry of Rx Circuit Identifier. Circuits can be given up

to an 11 Character alphanumeric Identity such as DLINK1

TERR INTERFACE

STANDARD INTERFACE

{RS422 SERIAL,RS232 SERIAL, V.35}

OPTIONAL HARDWARE INTERFACES:

{M2P PARALLEL, DVB PARALLEL, ASI}

{HSSI}

{ETHERNET 10/100 BASE-T}

{ETHERNET 10/100/1000 BASE-T}

{G.703: T1 AMI, T1 B8ZS, , E1 BAL, E1 UNBAL, T2 BAL, T2
UNBAL, E2}

Allows the user to select the Transmit Interface

BUFF SIZE (msec)

{0 - 64 msecs}

Allows the user to set the Doppler Buffer Size in msec.

BUFFER CLK SRC

The user must assign priorities to the clock sources. 1 being the

highest priority and 5 being the last resort. The menu has three

fields; the first field is the name of the clock source, the second

field is the priority entry area, and the last field is the depth of the

list. In the priority field, the up/down arrow keys will scroll through

the list displaying the names and the current priority. When the

desired clock name is displayed, the number keys may be used

to assign a priority value. Pressing <Enter> will re-sort the list.

Do this until the clock sources are prioritized in the order desired.

Use the left/right arrow keys to move the cursor to the depth

field. This field assigns the number of entries to use. The number

keypad or the up/down arrows can be used to change the value.

Clock Source

Priority

SRC DEPTH

RX SAT

of 3

SCTE

of 3

SCT

of 3

EXT BNG

of 3

EXT IDI

of 3

MAP COPY

{SRC Map Dest Map}

Allows the user to copy drop and insert maps. Tx Act map is the

drop map currently being used by the modem. Source and

destination may be any of the following:

Only these will

be used

Will not be

used since

4>3 and 5>3

Summary of Contents for DMD20 LBST



















































































































































































































































































































Search results

Summary of Contents for DMD20 LBST

Reviews:

Related manuals for DMD20 LBST

Brands by name

Popular brands

Radyne DMD20 LBST, Installation And Operation Manual

Search results

Summary of Contents for DMD20 LBST

Reviews:

Related manuals for DMD20 LBST

Brands by name

Popular brands