RADWIN 5000 SCB Jet User Manual
Release 4.2
4-11
Step 4: Install a PoE device
Hardware Installation
4.5.4 Step 4: Install a PoE device
•
Indoor PoE:
Strap the PoE into a network equipment rack using plastic ties, or
Place it on a tray or table-top
•
Outdoor PoE:
Mount this PoE using the supplied mounting kit (in the same manner as mounting an
HBS/HSU as shown in
Step 2: Mount the HBS/HSU
).
4.5.5 Step 5: Mount the Lightning Protection Units
The use of lightning protection is dependent on regulatory and end user requirements. The
SCB Jet has surge limiting circuits that minimize the risk of damage due to lightning strikes.
RADWIN recommends the use of additional surge arrestor devices to protect the equipment
from nearby lightning strikes.
In what follows, ODU may be any type of RADWIN outdoor radio unit and IDU may be any
type of RADWIN IDU used with such products.
Figure 4-20: Mounted Outdoor PoE
Table 4-2: LPU Kit contents
Item
Qty
View/Remarks
LPU
1
RJ-45 connectors
2
