RADWIN 5000 SCB Jet User Manual
Release 4.2
6-1
Chapter 6: Alignment and
Commissioning
6.1 Overview
This chapter describes how to align the HSU with its HBS, then carry out a throughput test
(Commissioning), using the
WINTouch
application.
At the HSU site, using
WINTouch
, you will follow its instructions and adjust the azimuth angle
of the HSU until
WINTouch
calculates the best angle.
6.2 Required Equipment
•
Laptop PC
•
CAT5e cable
•
HBS: Configured and activated, as well as physically located according to your site plan.
•
HSU: Physically installed in its location according to your site plan, but not registered to
its HBS.
6.3 Required Software
•
WINTouch
application, installed on the Laptop PC
•
RADWIN Manager application, installed on the Laptop PC
6.4 Preparations Before You Start
•
Connect your Laptop PC directly to the HSU (either via the CAT-5e cables or via an
external PoE as shown in
Figure 6-1
)
•
Change the IP address and Subnet Mask of your Laptop PC to an appropriate value for
working with the HSU:
