Pressing button
causes printing a report on a printer attached to the
indicator.
Pressing button
causes the return to the
<
Control of packaged
goods >
working mode without printing the report.
If the test result is that the number of errors
T,
according to the regulations,
requires expanding the sample. Operator is informed about it it the following
message box:
Press
and then some descriptions and boundary criteria are changed.
After the test has been comleted the test is summarised and the results are
automatically saved in the database and the report can be printed on an
attached printer.
Notice:
1. A pattern and example of the report from testing products are described
in ch. 30.8 of this manual,
2. A pattern and example of the report from estimating average tare are
described in ch. 30.7 of this manual.
30.5. Performing non-distructive testing in mode Empty-Full
For mode
„Non-destructive Empty-Full”
a user sets the measurement
“charge”
in the product data. According to the set
„charge”
a message
is shown that informs about putting empty packages first and then the
same packages after they have been filled up in the same sequence.
115
Summary of Contents for WLY/KTP Series
Page 2: ...2 DECEMBER 2011...
