RADWAG WLY/KTP Series, User Manual

Page: 87 / 176

•
assigned weighing platforms
< >
defined on a terminal.
Each of the weighing platforms can have its specific formulation or dosing
process (maximal number of processes for a single formulation is 2, as this
is the maximal number of weighing platforms connectable to a single
WLY scales).
Formulas database has the same searching mechanisms for a specific
formulation (record in a database) as other terminal databases.
A formulation can be searched in a database by:
•
formulation name
< >
•
formulation code
< >
Processes carried out on different weighing platforms operated by the same
terminal, can also be dependant on each other, e.g.: dosing on weighing
platform 2 can be initiated only on completing dosing on weighing platform 1,
which is confirmed by a signal from appropriate sensor.
27.3. Local setting of a working mode
Local settings for the working mode
< Formulation>
are accessible
on pressing a hot key
< Local parameters>
:
Ask for multiplier
Causes setting a question for formulation
multiplier, i.e. the number which is used to
multiply the values of mass of all formulation
components.
Ask for number of cycles
Causes setting a question on number of
formulation cycles, i.e. number of repetitions
of the same formulation.
Confirm batching
ingredients manually
Causes enabling manual confirmation by
pressing “Enter/Print” key on terminal’s
keyboard for each weighing process.
No. of weighings for
calculating the correction
Determines the number of recent
measurements which are analyzed for
calculating automatic correction in dosing
Global
Global settings of doisng process
Batching outputs
Enables setting the outputs for dosing (fine
dosing in case of two-step dosing process)
Bulk batching output
Enables setting outputs for bulk dosing in
case of two-step dosing process
87