RADWAG WLY/KTP Series, User Manual, Page: 68 / 176

22.2. Start mass adjustment
It is possible to adjust only a start mass, it helps to correct the start zero
when the span does not change.
Procedure:
•
Enter submenu
< User Adjustment >
according to ch. 22
and select:
“ Setting of start mass”
,
•
After entering the parameter the following message box appears:
•
Take the load off the pan of platform 1,
•
Press button . The following message appears during adjusting
start mass:
„Evaluation of starting mass”
,
•
After the procedure has been completed the following message
box appears:
•
Return to weighing, saving parameters.
22.3. Report from adjustment process
Parameter
< Report printout>
enables activating the function of
automatic printout of a report from adjustment process on a printer plugged
to the scale.
68