RADWAG PUE HX5.EX, Software Manual

Page: 22 / 96

22
9. COMMUNICATION
The scale operating in hazardous area can communicate with peripheral
devices, the communication is established via the following ports: RS232 (1),
RS232 (2), RS485.
Since the scale is intended for operation in hazardous area, its
communication interfaces have been equipped with hermetic
intrinsically safe connectors.
It is possible to expand communication interfaces range outside hazardous
area, this is done using IM01.EX communication module, connected to the
scale via intrinsically safe interface. Standard IM01.EX communication module
is equipped with the following interfaces: 2 x RS232, 4I/O, Ethernet, USB.
To set the ports go to
<
/
Communication>
submenu.
9.1. RS232
•
Select
<RS232>
port, where:
RS232 (1)
RS232 (2)
Communication ports of the scale.
RS 232 (3)
RS 232 (4)
Communication ports of the scale-connected IM01.EX communication
module.
•
Set transmission parameters:
Baud rate
2400, 4800, 9600, 19200, 38400, 57600, 115200 bit/s.
Data bits
7, 8.
Stop bits
1, 2.
Parity
None, Odd, Even.
9.2. RS485
Procedure:
•
Select
<RS485>
port.
•
Set transmission parameters:
Baud rate
2400, 4800, 9600, 19200, 38400, 57600, 115200 bit/s.
Data bits
7, 8.