50
15.2. Start Unit
Upon setting start unit, the scale activates with the set start unit for these
modes where change of the unit is possible.
Procedure:
•
Enter
<Units>
submenu, next enter
<Start unit activation>
parameter.
•
Go
to
<Start unit>
submenu and select start unit from the list.
•
Go back to the home screen and restart the weighing device.
•
After restart, the weighing device runs with the declared start unit.
15.3. Gravitational Acceleration
<Gravitational acceleration>
parameter compensates changes of gravity
force being a result of different latitude and altitude when the selected unit
is „Newton” [N].
Procedure:
•
Enter
<Units / Gravitational acceleration>
submenu,
<Gravitational
acceleration>
edit box is displayed.
•
Enter gravitational acceleration value respective for the particular place
of use and press
key to confirm changes.
15.4. Custom Units
option available for non-verified scales exclusively
Parameter allowing you to declare two custom units. Displayed custom unit
value is a result of calculation, where obtained in the course of measurement
weight value is multiplied by a multiplier determined for this particular custom
unit. By default the custom units are marked as:
[u1]
– custom unit 1 and
[u2]
– custom unit 2.
Procedure:
•
Enter
<Units / Custom unit 1>
submenu, set the following parameters:
Name
Unit name (3 characters maximum).
Multiplier
Adjustment unit multiplier.
•
Go to the home screen.
•
Now you can use the custom unit, to do it press
key.
Summary of Contents for PUE HX5.EX
Page 1: ...PUE HX5 EX WEIGHING INDICATOR SOFTWARE MANUAL ITKP 01 04 12 18 EN...
Page 2: ...2 DECEMBER 2018...
Page 96: ...96...
