- 41 -
14. PRINTOUTS
Printouts menu is dedicated for creating non-standard printout templates and selecting
type of a printout which is printed. Detailed description of non-standard printouts is
provided in point 19. of this user manual.
15. SETTING ACCESSIBILITY OF MEASURING UNITS
This group of parameters enables setting accessibility of measuring units, which are
available for an operator after pressing the
Units
key on balance’s overlay.
All measuring units which attribute is set to
1: yes
are accessible from the main menu level under a key for toggling between the measuring
units.
The measuring units described as 09 Taele Hk., 10 Taele S., 11 Taele T . the following
relations occur:
•
If the attribute of all three measuring units is set to 1: yes, then the software will
display only the first one, i.e. 09 Taele Hk
•
If the measurement should be carried out using 11 Taele T unit, then the attribute
of the other two units should be set to 0 : no
Enter group of parameters P7 Units.
Fig. 26. Measuring units - settings
After setting the required parameter values return to weighing mode in accordance with
point 7.1.2. of this user manual.
Caution:
In case of verified balances the available measuring units are limited to: [g], [mg], [ct] –
even if set to 1 – YES in balance’s menu
Summary of Contents for PS 1000/X
Page 2: ...2 APRILE 2013...
