- 9 -
3.2. Unpacking
Carefully remove the balance from its packaging, remove the plastic and foil
transport protective elements. Gently place the balance in its intended place of use.
Install the weighing pan, and other elements according to below scheme.
Microbalance MYA 3Y series
After installing the balance in its intended place of use assemble its components following
above scheme and in relation to balance type.
A – standard
1. anti-draft shield
2. bottom ring
3. weighing pan
4. glass top cover of the weighing chamber
B – balance MYA 0,8/3.3Y series
Apart from the standard execution (A) the
balance is available with a pan for weighing
filters.
1. anti-draft shield
2. bottom ring
9. pan for weighing filters
4. glass top cover of the weighing chamber
C – balance for weighing filters
2. bottom ring
10. pan for weighing filters
11. weighing pan
D – balance for pipette calibration
1. anti-draft shield
2. bottom ring
3. weighing pan
4. glass top cover of the weighing chamber
5. glass vessel
6. additional container for water
(evaporation ring)
7. glass top cover of the weighing chamber
with an opening
8. additional glass cover
Summary of Contents for MYA 0,8Y
Page 2: ...2 APRIL 2013...
