- 71 -
3.
If tolerance applies, set its value,
4.
Accept by pressing <
> key,
5.
Press High Threshold key and insert its value in [%],
6.
Accept by pressing <
> key
19.3.
Interpreting the function by use of a bargraph
The dosing and checkweighing functions are aided by graphic indication, in a
form of a bargraph. Below see an example of simultaneous operation of the
two functions.
a)
checkweighing thresholds <
> are set as Low Threshold = 90%,
High Threshold = 110%
b)
Target value = 105% ; tolerance = 5% <
>
c)
Reference mass = 19.986 g <
>
19.4.
Additional settings of Percent Setup mode
The additional settings enable adjusting the working mode to user’s needs and
requirements. Functions related to checkweighing: result control, tare mode,
automatic footer printout, printout mode / value release, printouts.
Means of using the above functions are given in point 10.8. “Additional
parameters on weighing process”.
