- 56 -
16.
PARTS COUNTING
Working mode
<
Parts counting>
enables determining quantity of small
parts (objects) with equal part mass. Counting is based on determined mass
of a single part, which is:
o
determined from a reference quantity of parts
o
acquired from database of products
o
inserted manually as a numeric value
Working mode activating procedure
•
while in the main window, press
soft key located in the upper bar of the
display, which opens a submenu <Working modes> with selection of
available working modes,
•
select <
Parts counting> mode, the software automatically returns to the
main window and displays
pictogram in the upper bar.
The grey coloured workspace contains the following data:
o
Gross
o
Standard mass
o
Low threshold
o
High threshold
o
Target value
On selecting the parts counting mode, the display contains the
following quick access keys in the bottom bar:
1.
Setup – access to balance’s menu
2.
Print header – print of data declared in the header
3.
Print footer – print of data declared in the footer
4.
Database of products – selection of products from corresponding
database
5.
Give mass of 1 part – editing field for inserting mass of a single part
6.
Set mass of 1 part – setting mass of a single part from optional number
of parts, e.g.: from 10 pcs, 20 pcs, 75 pcs, etc.
