'Getting Started' | 8
RADVISION | User Guide for SCOPIA XT1000 Version 2.0
Pairing a XT1000 Remote Control Unit with a Codec Unit
You can use the Remote Control Unit to control one or more systems in a same room, thus avoiding
interferences with other Remote Control Units. To do so, enter the same code in your Remote
Control Unit and in your system software. All Remote Control Units are supplied with a default
code (01).
Procedure
Step 1
On the Main Menu page, scroll to Settings.
Step 2
Press
User settings. The General page appears on the display.
Step 3
Using the arrow keys, scroll to Remote control code and type a two-digit code in the field. The
allowed range of code is between 01 and 99.
Step 4
Press
Save.
Step 5
Simultaneously press
and
. The
button becomes red.
Step 6
Using the keypad, type the two-digit code you just entered in the Remote control code field.
Step 7
Press
Finish.
