Mount the SCOPIA
100
MCU Unit in a 19" Rack (Optional) 5
M
OUNT
THE
SCOPIA
100
MCU
U
NIT
IN
A
19"
R
ACK
(O
PTIONAL
)
You can optionally mount the SCOPIA
100
MCU unit in a standard
19-inch rack. Two mounting brackets and a set of screws are
included in the SCOPIA
100
MCU unit shipping box.
Procedure
1.
Disconnect all cables including the power cables.
2.
Place the SCOPIA
100
MCU unit right-side up on a
hard flat surface, with the front panel facing you.
3.
Position a mounting bracket over the mounting
holes on each side of the SCOPIA
100
MCU unit.
Figure 2
Fitting a Bracket for Rack Mounting
4.
Pass the screws through the brackets and tighten
them into the screw holes on each side of the
SCOPIA
100
MCU unit using a suitable screwdriver.
5.
Insert the SCOPIA
100
MCU unit into the 19-inch
rack.
6.
Fasten the brackets to the side rails of the rack.
7.
Make sure that the air vents at the sides of the
SCOPIA
100
MCU unit are not blocked.
