Assign an IP Address to the MCU 7
4.
Start the terminal emulation application on the PC.
5.
Turn on or reset the MCU.
Note
The debug mode prompt appears before the boot
Configuration prompt. Ignore this message and wait for
the boot Configuration prompt to appear.
6.
Press any key at the command prompt to display
the network configuration
Main
menu.
Figure 3
Network Configuration Main Menu
Warning
Configuration of any of the parameters other than
<N>
should not be performed by an unauthorized person.
Press any key to start configuration...
Main menu
N: Configure default network port values
P: Change the configuration software
password
S: Configure network security level
A: Advanced configuration menu
Q: Quit
Select:
