51
EN
G
LIS
H
4
.
OSD Transparency:
Set the level of OSD Transparency, it varies from 0 to 40.
Default value is set to10.
5
.
Display Channel Info:
Set the i-plate and play time, it varies from 0 to 10 sec.
Default value is set to 3 sec.
6
.
Display Brightness:
Set the display at front, it varies from 0 to 5 sec.
Default value is set to 3 sec.
7
.
Standby Clock Time Display:
Displays time information in the standby mode.
The default value is set to
ON
.
8
.
VDF-Slide Display:
When it is set to
ON
, if you change the channel, the
channel number and name slide from right to left on
the display of the front panel. When it is set to
OFF
, the
channel number and name are displayed without sliding.
The default setting is
OFF
.
7.3 Setting Time Information
1
.
Time mode
You can set the current time (Local area time) in this
mode.
To set the current time, select the value using the
standardized information of current service area
By pressing the
Arrow(◄/►)
buttons. The time setting
will be used as the standardized time for the I-Plate,
Program Guide and Sleep Timer. Current Time is based
on TDT (Time and Date Table) at the stream of the
current channel.
■
Auto
mode: Time information is set from the selected
satellite/ TP (Default mode: Auto) For Auto mode, the
satellite /TP must be selected beforehand for proper
time information.
There will be a satellite / TP list shown on the screen.
From factory there will be a couple of Astra TPs
selected as default. .
■
Manual
mode: This mode will ignore time information
from the satellite but instead the user must set the
timing by manual.
■
Normal
mode: This mode is set to always receive
time information from the satellite.
Using the System Setup Function
Radix_Eng.indd 51
2006-09-15 ｿﾀﾀ・11:38:10
