Chapter 1: Overview
3
•
PMC sites
:
•
PMC site A
: A 32-bit PMC site with rear I/O interface on J14 to
CompactPCI J5. The rear I/O routes to PIM on the RTM for
user-configurable rear-I/O.
•
PMC site B
: 32-bit PMC site. Includes a build-time option for rear I/O
interface on J24 to cPCI J3.
Not fully compliant with CMC specification. Connector keepouts on the
PCB near the front panel have been violated.
•
Hot Swappable.
•
Supports IPMI.
•
On-board SDRAM operating at 100MHz; 256MB or 512MB of ECC SDRAM
on board. Provides up to 2G with two RadiSys memory modules.
•
Optional Rear Transition Module provides:
•
COM 1 RS232 (DB9).
•
COM 1 RS232 (10 pin header).
•
One USB connector.
•
Connectors for mouse and keyboard.
•
A header for secondary
•
Two Ethernet ports that support
EIDE.
10/100BASE-T.
•
PIM S17E.
•
1MByte Boot Block Flash memory.
•
Onboard headers for:
•
Floppy
•
ITP
•
Mouse/keyboard
•
RadiSys manufacturing header
•
Port 80 header
•
CPLD JTAG
•
National Semiconductor 87309 Super I/O.
•
Front panel interface:
•
LEDs: Blue HS LED and User/IPMI controllable Red/Green
LEDProgrammable.
•
RJ45 connectors: one each for COM 1 and Ethernet 1 (build-time option).
•
Reset button.
•
Watchdog timer with programmable timeouts which you can program to
produce hard or soft resets.
The EPC-3307 can accept the RadiSys memory module, available in 256 MByte,
512MByte, and 1GByte densities. You can stack two memory cards on the main
board, although you can use only one of each memory module density. The
following system memory configuration are possible:
•
512Mbyte onboard with ECC.
•
1.0Gbyte with a 512M RadiSys memory module with ECC.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
