PG
6
PG
6
PG
7
Mount the CT80 to Wall
1.
Hold the CT80 against the wall, with the wires coming over the
top; above terminal block. The CT80 will cover the hole in the wall.
2. Position CT80 for best appearance.
3. Attach the CT80 to the wall with the screws provided.
4. If you are mounting the CT80 to sheet rock or if you are using the
old mounting holes, use the plastic anchors provided.
5. Mark first and drill a 3/16-in.(4.8mm) hole for the insert at each
screw location, then mount the unit.
C
G
Y
RH
W
C
G
Y
RH
W
C
G
Y
RH
W
C
G
Y
RH
W
C
G
Y
RH
W
C
G
Y
RH
W
Wall
Wires
Wall
anchor
CT80
Screw to wall
Place wires like this
inside wire groove
from
HEAT/COOL
system
C
W
Y
RH G