PG
10
PG
10
4. Select the appropriate number of stages for your heating system (from 1 to 3) by touching the
number of STAGES (in brackets) to highlight, and using the +/- buttons to increase or decrease.
5. Touch the appropriate
FAN CONTROL
setting.
Select
HVAC
if your heating system controls the fan (appropriate for most gas, oil, propane and
similar furnaces).
Select
TSTAT
if you want the thermostat to control the fan (for most electric heating systems).
6. Go on to configure
COOL
or press
HOME
to return to the Home screen.
FASTSET for NORMAL A/C cooling systems:
1. Press
MENU
and then touch
HVAC SET-UP
.
2. Touch and highlight
COOL
in the upper left corner of the display.
3. Select the number of stages of compression for your cooling system (1 or 2) by touching the
number of
STAGES
and using +/- buttons to increase or decrease.
4. Touch to select the appropriate
FAN CONTROL
setting
HVAC
or
TSTAT
.
NOTE: Most cooling systems require that the thermostat
TSTAT
control the fan.
5. Press
HOME
to return to the Home screen.
SET-UP for HEAT PUMP systems:
1. Press
MENU
and then touch
HVAC SET-UP
.
2. Touch
HEAT
in the upper left corner of the display.
3. Touch
HEAT PUMP
.
4. Select the number of stages of compression for your heat pump system (1 or 2) by touching the
number of STAGES, and using the +/- buttons to increase or decrease (same for HEAT and COOL).
NOTE: Most heat pump systems have one stage of compression.
