8
On a Wall
For this mounting method, you need two
wood screws (not supplied) with heads
that fit into the keyhole slots on the bot-
tom of the base.
1. Drill two holes 3
15
/
16
inches (100 mm) apart
vertically. Then thread
a screw into each
hole, letting the head
extend about
3
/
16
inch
(5 mm) from the wall.
2. Plug one end of the supplied long
modular cord into the jack on the
bottom of the base, then route the
modular cord downward through the
groove.
3. Insert the supplied power adapter’s
barrel plug into the jack on the back
of the base, then route the adapter
cord through the strain-relief slot
and down through the groove on the
bottom right of the base.
4. Align the keyhole slots with the
mounting screws and slide the base
downward to secure it.
5. Plug the modular cord’s other end
into the two-line phone jack or cou-
pler that is connected to two single-
line jacks.
6. Plug the adapter into a standard AC
outlet.
3
/
16
3
15
/
16
43-633.fm Page 8 Friday, August 13, 1999 10:34 AM
