background image

3

Your ET-294 is ETL listed to UL stan-
dards and meets all applicable FCC
standards.

This symbol is intended to alert you to
the presence of uninsulated danger-
ous voltage within the product’s enclo-
sure that might be of sufficient
magnitude to constitute a risk of elec-
tric shock. Do not open the product’s
case.

This symbol is intended to inform you
that important operating and mainte-
nance instructions are included in the
literature accompanying this product.

READ THIS BEFORE 
INSTALLATION

We have designed your ET-294 to con-
form to federal regulations, and you can
connect it to most telephone lines. How-
ever, each device, such as a telephone
or answering machine, that you connect
to the telephone line, draws power from
the line. We refer to this power draw as
the device’s 

ringer equivalency number

,

or REN. The REN is on the bottom of
your telephone’s base.

If you use more than one telephone or
other device on the line, add up all of the
RENs. If the total is more than five, your
telephones might not ring. In rural areas,
a total REN of three might impair ringer
operation. If ringer operation is impaired,
remove a device from the line.

FCC STATEMENT

This telephone complies with Part 68 of
FCC Rules. You must, upon request,
provide the FCC Registration Number
and the REN to your phone company.
These numbers are shown on the bot-
tom of the base.

Note: You must not connect your phone
to any of the following:

• Coin-operated systems

• Party-line systems

• Most electronic key phone systems

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

CAUTION

: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE
COVER OR BACK. NO USER-SERVICE-
ABLE PARTS INSIDE. REFER SERVIC-
ING TO QUALIFIED PERSONNEL.

WARNING: To reduce the risk of
fire or shock hazard, do not ex-
pose this product to rain or mois-
ture.

!

!

43-633.fm  Page 3  Friday, August 13, 1999  10:34 AM

Summary of Contents for 43-633





















Reviews: