In
s
ta
lla
ti
o
n
5
INSTALLATION
M
OUNTING
Y
OUR
P
HONE
Your phone connects directly to a modular telephone line
jack. If your telephone wiring does not have a modular jack,
you can update the wiring yourself using jacks and adapters
(available at your local RadioShack store or online at
www.radioshack.com), or have the telephone company
update the wiring for you. You must use compatible modular
jacks that are compliant with Part 68 of FCC Rules and the
requirements adopted by the ACTA. The telephone cord
and modular plug provided are Part 68 compliant for
connecting to the telephone company network.
Ô
If your home has wired alarm equipment connected to the
telephone line, be sure that installing the phone does not
disable your alarm equipment. If you have questions about
what will disable your alarm equipment, contact your
telephone company or a qualified installer.
You can place the phone on a flat surface, or mount it on a
wall plate or directly on the wall.
Ô
On a Desktop
Plug one end of the supplied modular cord into the
LINE
jack
on the back of the phone, and the other end of the cord into
a modular wall jack.
Set the phone in a convenient place on a desktop or table.
Using the Wall Plate
1. Lift up the handset holder and rotate it 180
°
.
2. Insert the mounting bracket’s tabs into the slots on the
bottom of the phone. Then slide the bracket up until it
snaps into place.
3. Plug one end of the supplied modular cord into the
LINE
jack on the back of the phone.
4. Plug the other end of the cord into the modular wall
jack.
5. Line up the keyhole slots on the bottom of the phone
and the mounting bracket, with the wall plate tabs, and
then slide the system down until it is secure.
Ô
NOTE
Ô
Installation
Your phone is ETL listed to UL
standards and meets all applicable
FCC requirements.
Mounting Your Phone
•
The USOC number of the jack
to be installed is RJ11C (or
RJ11W for a wall plate jack).
•
If the phone line jack is not a
modular jack, you must update
the wiring. You can convert the
wiring yourself, using jacks and
adapters available at any
RadioShack store. Or, you can
let the phone company update
it for you.
Handset Holder
LINE
TONE PULSE
RINGER
OFF LO HI
HANDSET
NORM HI
M S
+
-
DC 9V 500mA
1 5 ANNC
ONL
Y
2 4 7
TS
RING SELECT
LINE
Mounting Bracket
