A
n
swer
in
g
S
y
s
te
m
O
perat
ion
14
4. To stop the outgoing message before it ends, press
STOP
.
To hear the announce only outgoing message at any time,
press
ANNOUNCE
twice.
S
ETTING
THE
VIP N
UMBER
You can program up to 10 VIP Numbers into your
answering system by using Caller ID records from frequent
or important callers. You can listen to VIP messages
individually by pressing the desired
VIP MAILBOX
button.
After you set a phone number as a VIP number, the VIP's
name appears instead of the normal CID information,
VIPXX
appears, and the voice message is stored in the specified
VIP mailbox.
1. Press
REVIEW
±
or
²
until the desired CID
memory location appears.
2. Press
VIP
.
VIP _
flashes.
3. Press the corresponding
VIP MAILBOX
button
for the desired VIP location.
4. To exit VIP setup, press
STOP
.
V
IP
A
LERT
You can store up to ten phone numbers in the VIP call list.
Whenever someone calls from one of those ten numbers, if
you subscribe to Caller ID service, the system beeps once
in between incoming phone rings to indicate that a VIP call
is coming in. This alert tone continues until the call is
answered. You hear a double beep alert tone every 15
seconds to remind you that there are VIP messages that
have not been reviewed.
1. To disable the VIP alert feature, hold down VIP for 3
seconds. The current VIP alert setting appears.
2. If
VIP ALERT ON
appears, press
REVIEW
±
or
²
to
change to
VIP ALERT OFF
.
3. The system exits automatically after 15 seconds.
To exit sooner, press
STOP
.
±
REVIEW
²
VIP
CALL
BACK
