P
hone
S
e
tt
ings
9
U
SING
T
OLL
S
AVER
Toll Saver (TS) allows you to check your messages from a
remote, long distance telephone without incurring long
distance charges.
Set
RING SELECT
on the back of the phone to
TS
. The
system answers on the second ring, when there are new
messages. To avoid long distance charges, hang up after
the second and before the fourth ring.
S
ETTING
THE
R
INGER
V
OLUME
To adjust the ringer volume, set
RINGER
on the right
side of the phone to
HI
,
LO
or
OFF
. With the ringer off,
and you can still answer calls if you hear another
phone ring.
S
ETTING
THE
D
IALING
M
ODE
Set
TONE/PULSE
for the type of service you have. If
you are not sure which type you have, do this simple
test:
1. Be sure
TONE/PULSE
is set to
TONE
.
2. Lift the handset and listen for a dial tone.
3. Press any number except 0.
Ô
If the dial tone stops, you have touchtone service. If the dial
tone continues, you have pulse service.
If you have pulse service, set
TONE/PULSE
to
PULSE
.
Otherwise, leave it set to
TONE
.
U
SING
THE
M
ASTER
/S
ECONDARY
S
WITCH
M/S
(Master/Secondary) lets you easily connect up to four
system modules to the same phone line, so you can receive
CID and Call Waiting information at more than one phone
on that line.
1. Set
M/S
on the back
of one phone to
M
.
2. Set
M/S
on all (up to
three) other systems
to
S
.
3. Set one system to
answer on; set the
others to answer
off.
Ô
If you connect only one system to a phone line, set
M/S
to
M
.
TONE/PULSE
RINGER
OFF/LO/HI
Ô
NOTE
Ô
Setting the Dialing Mode
If your phone system requires you
to dial an access code (9, for
example) before dialing an outside
number, do not press the access
code for this test.
Using the Master/Secondary
Switch
•
If M is not set on at least one
phone, or more than one phone,
incoming calls might be
disconnected.
•
You can also connect other CID
modules that do not have the
Call Waiting function to the
same phone line as your
system, as long as you do not
connect more than four CID
modules total (including this
phone).
•
If you connect another type of
CID module that has Call
Waiting (other than this system)
to the same phone line as your
system, the Call Waiting signal
might be garbled or not
received.
M/S
