11
Interference and
noise
•
Not
synchronised
• Screen
unlocked
• Noisy line
across the
screen
•
Adjust receiver antenna direction
for optimal performance.
•
Adjust transmitter antenna
direction for optimal performance.
n
Note
: Antenna does not rotate
360°. Rotating past the point
where resistance is felt will result in
permanent damage to the device.
•
Check if the supplied voltage
matches the adapter specification.
•
Select a different channel by
sliding the channel switch on both
transmitter and receiver.
•
If using a microwave oven, turn it
off.
•
Remove microwave oven or clear
unnecessary obstructions from
the path between transmitter and
receiver.
•
Move transmitter and receiver
closer. If the problems remain,
please contact your
Radioshack
store for help.
Troubleshooting
Problem
Possible Solutions
No picture or
sound
•
Check the power on/off switches
on the Transmitter, Receiver and TV.
•
Make sure the power plug and
signal cables are firmly connected.
•
Check if the channel of transmitter
and receiver are set to the same
channel.
•
Make sure that all cables are
connected correctly.
•
Check if there is any discontinuity
inside the cable.
•
If you use S-Video connection, your
TV set must be set to “S-Video”
mode.
15-332 -EN 033110.indd 11
4/6/2010 5:25:17 PM
