Digital BUS-WATCH
®
R1001 / R4001
Figure 76: Event Setup – Event Record Mode Screen Shot
The EVENT RECORD MODE subsection of the EVENT SETUP
SECTION has 4 options, NON-EVENT RECORD RATE, PRE RECORD, POST
RECORD TIME, and EVENT DURATION as shown in Figure 76 above. The
Event Record Mode is an option that allows the user to save on Hard Drive space
by recording all cameras using a low frame rate (about 1/64
th
the rate set in the
CAMERA section in Figure 64 on Page 64) until a pre-defined alarm(s) is
triggered. When in this mode, the DVR changes to the quality and frame rate
settings as shown in the CAMERA section in Figure 64 on Page 64 for the set
amount of time. Depending on the record settings set in Figure 64 on Page 64, the
amount of pre-record time will vary as the pre-record memory buffer is a set size.
The DVR will always give the maximum amount of pre-record time available,
which is often around 10 seconds. The Event Record Mode is disabled by setting
the NON-EVENT RECORD RATE to NORMAL.
NON-EVENT RECORD RATE:
NORMAL or I FRAME
PRE RECORD:
YES or NO
POST RECORD TIME:
30 – 300 Seconds
EVENT DURATION:
1 – 15 Seconds
Page 75 of 96
Radio Engineering Industries, Inc.
640370 -- Rev 0 -- 8/17/2007
