Digital BUS-WATCH
®
R1001 / R4001
Yellow Warning Lamps
Connect the YELLOW wires to each of the Warning Lamp Flashers’ Yellow
lamp outputs.
Red Warning Lamps
Connect the RED wires to each of the Warning Lamp Flashers’ Red lamp outputs.
Stop Arm Lamps
Connect the BLUE wire to the switched side of the top stop arm lamp.
Brake Lamp
Connect the BROWN wire to the switched side of one brake lamp.
On-Screen Information with Vehicle Sensor Options Harness
The Digital BUS-WATCH® Surveillance system, when equipped with the
BUS-WATCH® Option Harness, will display information on-screen in the
Installers Mode when the vehicle’s monitored switches are activated and signals
are applied to the monitored sensors.
ACTIVE SWITCH OR SIGNAL
ON-SCREEN DISPLAY
BRAKE APPLIED
BR
STOP ARM DEPLOYED
SA
YELLOW WARNING LAMPS ON
YW
RED WARNING LAMPS ON
RW
LEFT TURN SIGNAL ON
LT
RIGHT TURN SIGNAL ON
RT
FRONT DOOR OPEN
FD
REAR DOOR OPEN
RD
SPEEDOMETER
(SEE NOTE 1)
XX MPH
NOTE:
1.
The XXs represent the vehicle speed (i.e. 35).
Page 26 of 96
Radio Engineering Industries, Inc.
640370 -- Rev 0 -- 8/17/2007
